SLA (Stereolithography) huwa proċess ta 'manifattura addittiv li jaħdem billi jiffoka laser UV fuq bettija ta' reżina fotopolimer. Bl-għajnuna ta 'softwer tal-manifattura assistita mill-kompjuter jew disinn assistit mill-kompjuter (CAM/CAD), il-lejżer UV jintuża biex tiġbed disinn jew forma pprogrammati minn qabel fuq il-wiċċ tal-bettija tal-fotopolimeru. Il-fotopolimeri huma sensittivi għad-dawl ultravjola, għalhekk ir-reżina hija solidifikata fotokimikament u tifforma saff wieħed tal-oġġett 3D mixtieq. Dan il-proċess huwa ripetut għal kull saff tad-disinn sakemm l-oġġett 3D jitlesta.
CARMANHAAS jista 'joffri lill-klijent is-sistema ottika tinkludi prinċipalment Skaner tal-Galvanometru mgħaġġel u lenti tal-iskannjar F-THETA, espansjoni tar-raġġ, Mera, eċċ.
355nm Galvo Skaner Kap
| Mudell | PSH14-H | PSH20-H | PSH30-H |
| Ilma jibred/issiġillat ras scan | iva | iva | iva |
| Apertura (mm) | 14 | 20 | 30 |
| Angolu tal-Iskanjar effettiv | ±10° | ±10° | ±10° |
| Żball ta' Traċċar | 0.19 ms | 0.28ms | 0.45ms |
| Ħin ta' Rispons Pass (1% tal-iskala sħiħa) | ≤ 0.4 ms | ≤ 0.6 ms | ≤ 0.9 ms |
| Veloċità Tipika | |||
| Pożizzjonament / jaqbżu | < 15 m/s | < 12 m/s | < 9 m/s |
| Skennjar tal-linja/skanjar tar-raster | < 10 m/s | < 7 m/s | < 4 m/s |
| Skanjar tipiku tal-vettur | < 4 m/s | < 3 m/s | < 2 m/s |
| Kwalità tajba tal-Kitba | 700 cps | 450 cps | 260 cps |
| Kwalità għolja tal-kitba | 550 cps | 320 cps | 180 cps |
| Preċiżjoni | |||
| Linearità | 99.9% | 99.9% | 99.9% |
| Riżoluzzjoni | ≤ 1 urad | ≤ 1 urad | ≤ 1 urad |
| Ripetibbiltà | ≤ 2 urad | ≤ 2 urad | ≤ 2 urad |
| Drift tat-Temperatura | |||
| Offset Drift | ≤ 3 urad/℃ | ≤ 3 urad/℃ | ≤ 3 urad/℃ |
| Qver 8 sigħat Offset Drift fit-Tul (Wara 15-il minuta twissija) | ≤ 30 urad | ≤ 30 urad | ≤ 30 urad |
| Firxa tat-Temperatura Operattiva | 25℃±10℃ | 25℃±10℃ | 25℃±10℃ |
| Interface tas-Sinjal | Analogu: ± 10V Diġitali: protokoll XY2-100 | Analogu: ± 10V Diġitali: protokoll XY2-100 | Analogu: ± 10V Diġitali: protokoll XY2-100 |
| Rekwiżit ta' Enerġija tad-Dħul (DC) | ± 15V @ 4A Max RMS | ± 15V @ 4A Max RMS | ± 15V @ 4A Max RMS |
355nmF-Theta Lenties
| Deskrizzjoni tal-Parti | Tul Fokali (mm) | Scan Field (mm) | Max Entratura Pupil (mm) | Distanza tax-Xogħol (mm) | Immuntar Thread |
| SL-355-360-580 | 580 | 360x360 | 16 | 660 | M85x1 |
| SL-355-520-750 | 750 | 520x520 | 10 | 824.4 | M85x1 |
| SL-355-610-840-(15CA) | 840 | 610x610 | 15 | 910 | M85x1 |
| SL-355-800-1090-(18CA) | 1090 | 800x800 | 18 | 1193 | M85x1 |
355nm Raġġ Expander
| Deskrizzjoni tal-Parti | Espansjoni Proporzjon | Input CA (mm) | Output CA (mm) | Djar Dija (mm) | Djar Tul (mm) | Immuntar Thread |
| BE3-355-D30:84.5-3x-A(M30*1-M43*0.5) | 3X | 10 | 33 | 46 | 84.5 | M30 * 1-M43 * 0.5 |
| BE3-355-D33:84.5-5x-A(M30*1-M43*0.5) | 5X | 10 | 33 | 46 | 84.5 | M30 * 1-M43 * 0.5 |
| BE3-355-D33:80.3-7x-A(M30*1-M43*0.5) | 7X | 10 | 33 | 46 | 80.3 | M30 * 1-M43 * 0.5 |
| BE3-355-D30:90-8x-A(M30*1-M43*0.5) | 8X | 10 | 33 | 46 | 90.0 | M30 * 1-M43 * 0.5 |
| BE3-355-D30:72-10x-A(M30*1-M43*0.5) | 10X | 10 | 33 | 46 | 72.0 | M30 * 1-M43 * 0.5 |
355nm Mera
| Deskrizzjoni tal-Parti | Dijametru (mm) | Ħxuna (mm) | Kisi |
| 355 Mera | 30 | 3 | HR@355nm,45° AOI |
| 355 Mera | 20 | 5 | HR@355nm,45° AOI |
| 355 Mera | 30 | 5 | HR@355nm,45° AOI |
